PIMSYNC-MIGRATION(7)

NAME
pimsync-migration - migration guide from vdirsyncer to pimsync

DESCRIPTION
This migration guide covers changes to be kept in mind when migrating from vdirsyncer to pimsync. It is geared towards users with a working configuration of the previous implementation.

MISSING FEATURES
The following features are implemented by vdirsyncer 0.19.3, but are not currently not available in pimsync:
•   auth digest This needs to be implemented as a ‘tower-service’ middleware. Should not be too complicated.
•   partial_sync This configuration parameter probably won't come back in the same way. A "mirror" is the most likely successor. With this directive set, pimsync(1) would make B a mirror of A. In this mode, exactly one storage MUST be defined a read_only.
•   post_hook configuration parameter. Future versions might stream events, so external handlers can react to them instead.
•   start_date, end_date, and item_types configuration parameters for CalDav storages. These are planned, but no specific time frame.
•   The singlefile storage, which saves all events in a calendar into a single file.

The following features are not present and unlikely to be implemented without a compelling use case. Please reach out if your require some of these:
•   Encodings other than UTF-8
•   All metadata is synchronised. Selecting individual fields is not currently possible.
•   The Ic fileignoreext configuration parameter.

CONFIGURATION FILE FORMAT
The configuration format has changed. The general approach is the same but the syntax has been greatly simplified for humans to write. Technically, the format is the *scfg* format. It is documented in detail in pimsync.conf(5).

The following:

    [pair.contacts]
    a = "contacts_local"
    b = "contacts_fastmail"
    collections = "all"
    conflict_resolution = ["nvim", "-d"]

Becomes:

    pair contacts {
    	storage_a contacts_local
    	storage_b contacts_fastmail
    	collections all
    	conflict_resolution nvim -d
    }

And the following:

    [storage.contacts_local]
    type = "filesystem"
    path = "~/.local/share/contacts/"
    fileext = "vcf"

Becomes this:

    storage contacts_local {
    	type vdir/vcard
    	path ~/.local/share/contacts/
    	fileext vcf
    }

FETCH MECHANISMS
The prompt mechanism for fetching passwords has been dropped.

A fetch definition with a command would previously look like this:

    password.fetch = ["command", "hiq", "-dFpassword", "proto=carddavs", "username=…"]

Now a block is provided to password with a single cmd directive specifying the command and its arguments.

    password {
    	cmd hiq -dFpassword proto=carddavs username=…
    }

A fetch definition with a shell now uses a similar syntax:

    password {
    	shell pass show communication/migadu.com | head -1
    }

  MIGRATING FETCH / PROMPT
Use an external prompter instead. For a GUI prompter, consider using:

    password {
    	cmd zenity --password
    }

pimsync(1) will request passwords in sequence, so no special considerations are required to prevent concurrent prompts.

MANUAL DISCOVERY IS NO LONGER REQUIRED
Discovering collections ahead of time is no longer required. Collections are discovered automatically if necessary. The discover command merely prints discovered collections as a convenience for manually configuring collections. It does not affect pimsync's internal state. See pimsync(1) for details.

AUTOMATIC CREATION OF COLLECTIONS
If a pair is configured to synchronise all collections from a and a new collection is found on storage A, then the collection will automatically be created on storage B. For scenarios where automatic creation of collections is undesirable, individual collection should be explicitly specified instead.

DRY RUNS ARE NOW POSSIBLE
It is now possible to execute a dry run, which only prints the tentative plan without executing it. The output is somewhat terse at this stage and not in its final form. This can be used to audit new configurations and ensure that the planned actions make sense.

FILESYSTEM STORAGES HAVE BEEN RENAMED TO VDIR
Filesystem collections have been renamed to vdir. They must now specify what type of items they contains.

A directory with icalendar files should specify:

    type = "vdir/icalendar"

A directory with vcard files should specify:

    type vdir/vcard

CUSTOM ENCODINGS FOR VDIR STORAGE
The vdir storage saves files as UTF-8. If another encoding is required for some scenario, please open an issue at: https://todo.sr.ht/~whynothugo/pimsync

FILESYSTEM FILEEXT FIELD
The fileext field for filesystem storages required a leading dot. This is no longer the case; the dot is not considered part of the extensions and should be omitted. Omit the leading dot when porting configurations.

COLLECTIONS ARE DECLARED IN A DIFFERENT FORMAT
To synchronise all collections from both sides, use:

    collections all

To synchronise all collections present on a specific storage, use:

    collections from b

  SPECIFYING INDIVIDUAL COLLECTIONS
Individual collections can be specified by id or by href:
file ... id is the name from the discovery process. file ... href is the full path inside the storage.

Generally, using an id is recommended. Using href is intended for situations where discovery is not possible or where multiple collections have the same id. To specify a single collection by id, use:

    collection c037725e-e4fd-4b3e-b73d-d5e27d5a90a9

The above will find synchronise collections with the given id between both storages.

Two different collections can mapped on each side:

    pair my_pair {
    	# other fields here
    	# first collection
    	collection {
    			alias personal
    			href_a /calendars/hugo/c037725e-e4fd-4b3e-b73d-d5e27d5a90a9/
    			href_b /personal/
    	}
    	# another collection
    	collection {
    			alias work
    			id_a work
    			href_b /calendars/work/
    	}
    }

Specifying collection null is no longer allowed; configuration should point to an explicitly collection instead.

HTTP STORAGE IS NOW CALLED WEBCAL
The type of the http storage is now webcal, to better reflect its nature; other storages also use HTTP internally.

WEBCAL COLLECTION ID
Due to its nature, the WebCal storage has a single collection. However, this collection has no id. A collection id must be provided for it explicitly. This simplifies configurations where it must be synchronised to another calendar with the same collection id.

    storage calendars_lessons {
    	type http
    	collection_id lessons
    	url {
    		cmd hiq -dFurl proto=webcal alias=lessons
    	}
    }

READ ONLY
The read_only takes no values. Its presence makes a storage read only. To make a storage read-write, remove the directive.

STATUS
Vdirsyncer keeps a status database in order to distinguish whether an item has changed on one side or both. Pimsync does not import this status database in any way. If you are migrating and have existing remote and local storages, makes sure that they are in sync before switching over. After the first run, pimsync will build its own status database.

Migrating with out-of-sync storages will result in conflicts during the first run.

TLS CONFIGURATION
The verify configuration directive is now named tls_root.

The verify_fingerprint configuration directive is now named tls_fingerprint.

ISSUES
Please report issues at: https://todo.sr.ht/~whynothugo/vdirsyncer-rs

If you have a working vdirsyncer configuration, and this page is missing details necessary when upgrading, please reach out so this documentation can be improved.

SEE ALSO
•   pimsync(1)
•   pimsync.conf(5)
•   ‘scfg, simple configuration format, https://git.sr.ht/~emersion/scfg’
•   hiq(1), used to query a himitsu(7) secret store.